CDR Report Sample for Engineering Technologist 233914
CDR Report Samples Approved By Engineers Australia
Download the free CDR report samples written by our professional experts according to the Migration Skill Assessment guidelines.
CDR Report Sample for Engineering Technologist
An Engineering Technologist is an expert prepared in specific parts of the advancement and execution of an individual innovation region. Building innovation instruction is significantly more applied and less hypothetical than designing training. However, from an expansive perspective, both have an emphasis on functional application. Building technologists frequently help builds; however, they can likewise become engineers following quite a while of experience.`{`1`}` Like specialists, regions where designing technologists can work incorporate item configuration (counting improvement), manufacture, and testing. Additionally, engineers build technologists once in a while, ascend to senior administration positions in industry, or become business visionaries.
Project Name: Wave Tank- Design and Dimensioning
In first career episode, the author describes the project accomplished during the four years Bachelor degree from 2011 to 2015 on Maritime Technology. The project’s name was “Wave Tank- Design and Dimensioning”. The responsibilities of the author were:
To make a Gantt chart to plan for the starting and ending time of the activities
To construct the wave tank for the purpose of simulation
To design the wave absorber and check for its stability
To create the foundation plate for the tank to make the surface of the plate smooth
To measure of various wave parameters using sensors
Project Name: Robotic Exploration of Extreme Environments (ROBEX)
In second Career Episode, the author explains the engineering skills she used in the project she was involved in during the time January 2015 to January 2016. Her duties and responsibilities in the project “Robotic Exploration of Extreme Environments (ROBEX)” were:
To study about the influence on inductive energy of salt water and lunar regolith at positioning tolerances
To analyze the probability of using induction of power by using the coils to transfer the power in the extreme environmental conditions
To setup the experiment in order to deal the situation by varying different condition like the medium of operation and the distance between the coils used to create the magnetic field
To see the effect in the inductivity level with different materials varied upon the environment
To research about the sources of power that were being practiced when operating in the extreme environment condition
Project Name:Conception, Design and Efficiency Audit of Mechanical Processes for the Separation of Algae from Animal Tank Waters on a Technical Scale
In third Career Episode, the author demonstrates her technical skills she used to complete the project she presented as her Masters degree thesis in the period from April 2016 to November 2016. The project was “Conception, Design and Efficiency Audit of Mechanical Processes for the Separation of Algae from Animal Tank Waters on a Technical Scale”. The key responsibility of the writer was:
To find a new solution for a mechanically based water treatment plan
To determine most efficient operating parameters (centrifugation-number and centrifugation–duration) during centrifugation
To separate the solid components as well as reduce the bacteria by low-pressure ultrafiltration
To determine which method was most suitable for the separation of the algae and solids in the water of the seal basin with an allowable maximum solids content of 15 mg/L
To construct the disc separator
To determine the cost analysis report
Our Services
Our Features
Do you have queries and want to consult with experts?
If you have further queries about our services then you can take consultation with our experts and professionals.
